Are you pissed off looking at DNS PROBE FINISHED NXDOMAIN error flashing on your screen? But here we have discussed few methods by which you can yourself fix the DNS_ PROBE_FINISHED_NXDOMAIN in Google Chrome. This type of errors usually occurs when the DNS Lookup fails. The techniques discussed can also be implemented on other web browsers as well. Take a quick look at the methods mentioned below.
5 Ways to Fix DNS_ PROBE_FINISHED_NXDOMAIN
- Reset Chrome to Default
- Change the DNS Server Address
- Release and renew IP using CMD (Command Prompt)
- Disable the Firewall or VPN
- Reset the router
Solution 1: Reset Chrome to Default
This method is the easiest of all and works in most of the cases. You need to type in chrome://flags/ in the address bar in the Google Chrome browser. Then press Enter. After this click on “Reset all to default” button at the bottom- right and restart the browser.
Solution 2: Change the DNS Server Address
This method is the most effective on and drives sure shot results. The DNS PROBE FINISHED NXDOMAIN problem occurs when the DNS servers of the computer do not respond. So in this fix, we will change the DNS server address to the more reliable one.
Step1: Open “Control Panel” and click on “Network and Sharing Center” option. A dialog box opens.
Step2: Then click on “Change adapter settings” option in the sidebar. A new dialog box opens.
Step3: Now choose your active Network Connection it can LAN, Ethernet, Wi-Fi etc. Open it and choose “Properties”.
Step4: From the Wi-Fi properties dialog box select “Internet Protocol Version 4 (TCP/IPv4)” and click on “Properties”.
Step5: Then type the following values for Preferred DNS server and Alternate DNS server .
Preferred DNS server: 220.127.116.11
Alternate DNS server: 18.104.22.168
Then press OK. The error will be resolved.
Also Read: Fix DNS Probe Finished Bad Config error
Solution 3: Release and renew IP using CMD (Command Prompt)
Step1: Go to Start find “Command Prompt” option. Then right-click on it as choose “Run as administrator”.
Step2: Type “ipconfig /release” and press Enter.
Step3: Then type “ipconfig /all” and press Enter.
Step4: Type “ipconfig /flushdns” and press Enter.
Step5: Now type “ipconfig /renew” and hit Enter.
Step6: Type “netsh int ip set dns” and press Enter from keyboard.
Step7: Now finally type “netsh winsock reset” and press Enter.
Step8: Then Restart the PC. Now the internet should start working.
Solution 4: Disable the Firewall or VPN
Sometimes the Firewall or VPN (Virtual Private Network) can cause connection loss. Disable the Firewall or VPN and then check. If the web pages load and internet starts working then you have fixed the DNS probe finished error. Now try reinstalling the software or update them whichever is convenient for you. If the error is still there try other solutions mentioned.
Solution 5: Reset the Router
Last technique that you can try is to reset the router. Or you can also check for some connection issues. Check for the signal LED blinking etc. If you still face the error try the other methods.
We hope that you could fix the DNS_ PROBE_ FINISHED_ NXDOMAIN error by referring to the methods stated by us. For any queries feel free to comment below. We will get back to you with a solution ASAP.